DPB-500K Pharmaceutical Paper-card Blister Packing Machine
Application:
DPB-500K Automatic blister card packing machine adopt frequency control speed. Collecting machine, electricity, photo, air to integrate and innovative design, manufacture according to national standard strictly. Flexible stroke, modularize station structure, easy operate, high output, low noise and equipped with beautiful out looking. DPB500K is the ideal packing machine. DPB500K main device including PVC heating, blister forming, stroke pulling, punching, transporting, heating & sealing, etc. the PVC formed after heating and being soften in the forming mould. The blister fed product via blister detection device then into the punching device to make the single blister with product. After then, the blister delivered to heating and sealing device. At last, the finished products sent out to next procedure. All the devices work synchronously. The blister forming and products deeding equipped with the sensor in case of the bad blister and lack of products in blisters. Waste products rejected out via water products exit.
Working flow:
PVC sheet(width adjustable)---Preheating---Blister forming(molds changeable)---Dragging blister---Cutting blister(molds changeable)---Recycling waste PVC---Rejecting bad blister(These steps can be used for making blister only)---Taking blister to the down sealing molds(can save packing material)---Checking blister---Feed products manually---Automatic feeding(molds changeable)---Putting cards by hand---Orientate the cards---Checking cards---Heat sealing twice---Finished products conveyed out
Technical parameter:
PVC thickness |
0.15-0.5mm |
PVC width |
330-460mm |
Card board |
200-700g |
Air compress |
0.55-0.85Mpa |
Air consumption |
≥0.3 CBM/min |
Power supply |
380V, 50Hz, 9.5 KW |
Mold cooling Running water or recycling water(50L/H) |
Capacity |
10-30 punches/min |
Forming area |
500x(125-220)mm |
Shaping area |
(310-440)x(120-180)x(16-45)mm(LxWxT) |
Size of machine |
3800x900x1650mm |