Main Machine Product Introduction:
KN95/N95 mask main machine, also known as mask slapper machine, which is used for semi-automatic production of multi-layer material flat masks . It can use 1 ~ 5 layers of N95PP spunbond nonwoven activated carbon and filter materials. From feeding to the insertion of the nose line, edge banding, and cutting the finished product are all a line of semi-automatic operation. The flat mask production equipment has advantages of stable performance, high output, low defect rate and easy operation. The mask slapper machine adding several ear band welding machines and sealing welding machines can produce all kinds of masks.
KN95/N95 mask machine features:
1.The machine is dense, small in size and does not occupy space;
2.High stability and low failure rate;
3.The whole machine adopts aluminum alloy structure, which is beautiful and firm without rust;
4.The welding strength of the ear strap is adjustable.
5.Using ultrasonic system, stable performance and easy operation
6.The frame is made of aluminum alloy and stainless steel, which is light and beautiful and does not rust.
7.Automatic counting can effectively control production efficiency and production schedule.
8.Pull the tube into the material and position more accurately, which can control the width of the raw material to a minimum and save costs.
9.Uniform control of finished product length and size, deviation ± 1mm, can effectively control finished product length.
10.The equipment has a high degree of automation and low requirements on the operation staff. Workers only need to unwind and sort the finished products.
11. Using ultrasonic system, stable performance and easy operation.
Technical parameters:
| No |
Content |
Specification |
Description |
| 1 |
function |
KN95/N95 mask slapper |
|
| 2 |
Size |
1225MM(L)*670MM(W)*1685MM(H) |
|
| 3 |
Power Supply |
220VAC ± 5%, 50HZ, rated power 3.5KW |
|
| 4 |
Pressure |
0.5MPa, using flow rate about 300L / min |
|
| 5 |
Operating environment |
Temperature 10-35 ºC, humidity 5-35% HR |
clean room, aseptic, 100,000 or above clean workshop |
| 6 |
Max.Production Capacity |
60PCS/MIN |
The actual capacity is determined by the speed of the operator |
N95 mask ear strap welding machine
Application:
This machine mainly uses the principle of ultrasonic wave, which is used for welding the ear straps of plane, cup and other special-shaped masks. Easy operation, beautiful welding spot, and don't damage materials.
Masks are manually picked and placed. The machine is compact, covers a small area, and has a rotating mechanism.
Technical Data:
Outputs: 25-30 pcs/min (According to the manual speed)
Weight:35KG
Power: 220V 50HZ
Compressed air Pressure:0.5mpa
Size:1000*600*1500
kN95 mask edge banding machine:
KN95/N95 mask edge banding machine:
Application:
1.Using ultrasonic welding, avoid needle thread, save the trouble of frequent needle thread change, there is no broken thread joint of traditional thread stitching, it can clean and partial cut and seal of textiles. At the same time, the stitching also plays a decorative role, with strong adhesion, a three-dimensional relief effect on the surface, fast working speed, good product effect and high-end beauty; the quality is guaranteed.
2.Using ultrasonic and special steel wheel processing, the edge of the seal is not cracked, the edge of the cloth is not hurt, and there is no burr and curling.
3. The operation is simple, and it is not much different from the traditional sewing machine operation method, ordinary sewing workers can operate.
Technical Data:
Power:AC-220V 50Hz
Outputs:25-30 pcs/min
Ultrasonic frequency:2600KW
Weight:100KG
Frequency:15KHZ
Size:500*500*1000MM
Finish Products Sample Photo
5/ Basic information of the equipment:
1. Configure the power supply:
AC220V ± 5%, 50Hz, or 380V, 50HZ,
2. Compressed air:
0.4MPa ~ 0.7MPa pressure fluctuation ± 1% (clean water after removing water, no oil, filtering, voltage stabilization)
Audited Supplier 
){kind=link}
){kind=link}